Yep, I do plan to carbonate. Exactly how is still a bit of a question. I considered forced carbonation, but I don't have the equipment for it and I'm not sure exactly how to do it when you plan to bottle, everybody does it when they keg a beer. I don't want to have to buy a small keg just to get bubbles in my mead. I thought about just priming it as is usually done since that seems to reactivate yeast that have been chemically stopped, so it might urge on those at their limit as well. My favorite option thus far is a slight modification of the usual technique. It still involves priming with sugar or malt, but also involves slightly diluting the mead. Stand by for another long-winded explanation ;DJoeM said:i apologize if this has been addressed elsewhere but, traditionally braggots are carbonated (not that braggot is really a traditional drink). do you plan on carbonating this recipe? and if so how do you plan on doing so if you are going to run the yeast to the point of their alcohol tolerance?
Just wondering
JMV
Let's say you have 1 gallon of mead at 15% ABV. If you add 12 ounces of sugar water (10% of a gallon) you drop the % ABV to somewhere between 13.5 and 14%. That should give the yeast enough room to slowly reanimate and supply the desired CO2. I think this is actually more controlled than the standard method since you can dilute more or less depending on how much carbonation you want. The downside is that you have to experiment with each recipe to find out how much to dilute it to get what you want. I think I'll give this a shot, pour the priming mix into a bottling bucket, rack the finished mead on top of it to thoroughly mix it, then bottle and wait.
Can't I ever give a simple answer to a simple question? :-[